2016 HOTRONIC FootWarmer S4 Custom Kit
S SERIES FOOTWARMER
Offers up to a combined 30% increase in higher average temperatures and longer durations on a single full charge.
Maintains up to 55% of a full charge and 95% of the initial capacity after four years of non-use!
Provides power when needed most, in the cold!
WHEREVER ONE GOES - WHATEVER ONE DOES
Installs in all types of footwear.
Transfers from one pair of footwear to another.
Use while skiing, snowboarding, bicycling, horseback riding, and during other general cold-temperature activities.
FOOTWARMER S4 CUSTOM FOOTWARMER Includes:
2 Battery Packs
2 Heating Elements
1 pair of Self-Adhesive Covers & Strips
Operating Instructions & Limited Warranty Card.
For installation in Hotronic_„Žs Heat Ready Insoles or on custom insoles, orthotics, or insoles of one_„Žs own choice.
HOTRONIC_„ŽS BATTERY PACK S4
Offer three (3) base level settings for comfort and warmth maintenance.
Provide a fourth (4th) _„ñtimed_„ setting for an extra blast of heat.
Powered by high capacity, cold temperature operation, NiMH AA cells.
NiMH cells do NOT have a _„ñmemory effect_„ and do not require fully discharging before fully recharging.
Temperature & Duration Chart
Approximate Average Temperature
84 - 98
29 - 37
16.5 - 21 h
107 - 121
42 - 49
7 - 10.5 h
122 - 138
50 - 59
5 - 7.5 h
158 - 173
70 - 78
2.5 - 4.5 h
|Based on Battery Pack in ambient temperatures of -22‘ to -15‘C (-9‘ to +4‘F).|
Based on Heating Element in ambient temperatures of 20‘ to 26‘C (68‘ to 79‘F).
HOTRONIC_„ŽS RECHARGER POWER PLUS S/e/m SERIES
Compatible with all S, e, and m Series Battery Packs.
Advanced charging technology senses when one or more batteries inside each Pack are fully charged and protects them from overcharging damage by switching to trickle current recharging.
Global input range of 100V to 240V.
Meets full standards and approval from US and Canadian ETL as well as European CE.
Recharger LEDs indicate recharging mode and charge status.
HOTRONIC_„ŽS HEATING ELEMENTS
Easily install in Hotronic_„Žs One Size Fits All Heat Ready Insoles, Semi Custom Heat Ready Insoles, on insoles of one_„Žs own choice, or come pre-installed in Hotronic_„Žs BD Anatomic Insoles.
Easily install on surface of insoles with self-adhesive layer as found on bottom of Heating Elements.
Provide effective anatomical coverage of toes with large oval shape.
Flexible Stress Relief on Plug facilitates plugging into and unplugging from Battery Pack. Remains flexible down to subzero (‘F) temperatures.